Which turf should I go with?
SYNLawn Golf manufactures every type of turf available in the synthetic turf industry. Many companies claim to manufacture synthetic turf, but only have one or two products to offer. We offer a full product line of polypropylene, polyephelyne, nylon and combination turf products for our customers to choose from, and have the ability to custom make any turf based on your specifications. The most important factor to consider when choosing a synthetic turf is the intended purpose of the green. What do you want to use your green for? Your putting green should have a turf that is right for your needs. Select a turf product from the tables below for a full description of each turf and its specifications. Also, the Synthetic Greens at a Glance table can assist in deciding which turf is right for your needs.

Product: 399N Product: 499N Product: 525PN Product: 586N Product: 619N Product: 699N $4.55 sq. ft. $5.71 sq. ft. $4.34 sq. ft. $6.70 sq. ft. $7.09 sq. ft. $8.00 sq. ft.

Nylon Turf
Nylon & Nylon sand-filled synthetic turfs have "memory." The fibers are heat-set during the manufacturing process at 230 degrees and will resist becoming matted down by springing back to their original upright position. Our nylon synthetic turfs are much denser than our polypropylene sand-filled turfs. That is why our nylon products require zero to minimal amounts of sand-fill. Nylon is also a much stronger fiber than polypropylene and will resist fading and wear in all weather conditions. Our sand filled nylon products have been specifically designed as excellent all-purpose turfs. They give you the best of both worlds - excellent shot receiving and superb putting performance. Also, by adding a small amount of sand-fill to you putting green, you can increase the speed of your green. Nylon synthetic turf does not require maintenance after it is installed, unless you add sand during the installation. Whether you choose a sand-filled or non sand-filled nylon turf, the surface of your green can be cleared of debris easily, by either blowing or sweeping the surface.

Product: 298P Product: 333P Product: 344P $4.24 sq. ft. $4.41 sq. ft. $4.56 sq. ft.

Polypropylene Turf
Polypropylene is a form of plastic. All polypropylene turfs require some sand-fill to perform well. There are a couple of reasons why you need sand-fill in a polypropylene turf. The most important reason is because the fibers cannot stand upright on their own. Sand fill is also required to help prevent the fibers from becoming matted down. Adding sand-fill to a putting green will equate to periodic maintenance, despite claims to the contrary. Heavily sand-filled greens will become hard over time, and will require a little more maintenance to provide good performance. These sand-filled turf products require 4-12 pounds of sand per sq. ft., and must be brushed and re-filled with sand if the sand-fill becomes compacted or washed away. With the right sand-fill, polypropylene provides an excellent surface for receiving long approach shots. (The sand-fill helps disperse the energy of a ball when hit into a green from any significant distance.) Putting on a sand-filled turf does have a drawback however. You will experience a "grainy" effect when you putt on a sand-filled turf. This means that the ball will roll faster with the grain than against the grain. This effect will occur with most polypropylene products that you choose.